Flush Mounting Installation (Optional)

Last updated
Save as PDF

We do not recommend flush mounting and sealing as servicing requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop.

We do not recommend flush mounting and sealing as servicing requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop. The owner must ensure the cooktop has been cut out from the benchtop before servicing can be carried out. Fisher & Paykel will not be liable for any costs associated with removing or replacing a flush-mounted and/or sealed-in product, nor for repairing any damage that may be incurred by doing this.

Gas inlet connection is located in the rear right corner.

Property (mm)	CG301D	CG302D	CG451D	CG603D	CG604D	CG752D	CG903D	CG905D
Overall height of product (excluding burners, dials and pan supports)	64	64	64	64	64	64	64	64
Overall width of product	300	300	450	600	600	750	900	900
Overall depth of product	530	530	530	530	530	450	450	530
Height of chassis (below top of bench)	64	64	64	64	64	64	64	64
Width of chassis	256	256	406	555	555	706	856	856
Depth of chassis	486	486	486	486	486	410	410	486
Overall width of routered recess	305	305	455	605	605	755	905	905
Width of cutout	260	260	415	560	560	715	865	865
Overall depth of routered recess	535	535	535	535	535	455	455	535
Depth of cutout	490	490	490	490	490	410	410	490
Corner radius of cutout	max. 10	max. 10	max. 10	max. 10	max. 10	max. 10	max. 10	max. 10
Corner radius of routered recess	max. 2	max. 2	max. 2	max. 2	max. 2	max. 2	max. 2	max. 2
Height of routered recess	5	5	5	5	5	5	5	5
Distance from top of bench to centre of gas inlet on product	35	35	35	35	35	35	35	35
Distance from edge of chassis to gas inlet on product	21	21	21	21	21	21	21	21
*Minimum clearance below top of benchtop to: rear top of oven installed below cooktop or cabinetry thermal protection barrier**	75 70	75 70	75 70	75 70	75 70	75 70	75 70	75 70