Skip to main content
Fisher & Paykel Product Help

Introduction

About your new cooktop and touch control overview.

About your new cooktop

Thank you for buying a Fisher & Paykel ceramic glass cooktop. This guide introduces you to all its special features. We recommend you read the whole guide before using your new cooktop, for both safety and cooking success.

For more information, visit our local website listed on the back cover.

Before using your new cooktop

  • Read this user guide, taking special note of the ‘Safety and warnings’ section.
  • Remove any protective film that may still be on your cooktop.

Screen Shot 2017-06-19 at 2.35.01 PM.png

Touch Controls Overview

Screen Shot 2017-06-19 at 2.37.10 PM.png

Using the touch controls

  • The cooking zone and timer displays also function as touch controls. To select a cooking zone or the timer, simply touch its display. Use the ball of your finger, not its tip. The controls respond to touch, so you don’t need to apply any pressure.
  • Once you have selected a cooking zone or the timer, you have 10 seconds to set it (while the little red light at the bottom right of the display is on). If the little red light goes out before you have had a chance to select a setting, simply re-select the cooking zone or timer by touching its display again.
  • Make sure the controls are always clean, dry, and there is no object (eg a utensil or a cloth) covering them. Even a thin film of water may make the controls difficult to operate.
Screen Shot 2017-06-19 at 2.39.10 PM.png

To select a setting on the selector:

Screen Shot 2017-06-19 at 3.03.33 PM.png

Touch at one point to “jump” to a specific setting

Screen Shot 2017-06-19 at 3.03.41 PM.png

slide your finger along the selector.

To start cooking:

Screen Shot 2017-06-19 at 2.44.17 PM.png

  1. Turn on the cooktop.

Screen Shot 2017-06-19 at 2.44.35 PM.png

  1. Select a cooking zone.
Note-Icon.png
  • Screen Shot 2017-06-19 at 2.47.30 PM.png (cleared) in the timer display means that the timer is not set.
  • If you do not select a cooking zone within 20 seconds, the cooktop will automatically turn off.

Screen Shot 2017-06-19 at 2.46.32 PM.png

  1. Select a heat setting (Screen Shot 2017-06-19 at 2.50.55 PM.png).

Note-Icon.png

Setting Screen Shot 2017-06-19 at 2.53.17 PM.png (between Screen Shot 2017-06-19 at 2.51.30 PM.png and Screen Shot 2017-06-19 at 2.52.10 PM.png) provides continuous gentle heat between Screen Shot 2017-06-19 at 2.51.30 PM.png and Screen Shot 2017-06-19 at 2.52.10 PM.png.

See ‘Using your cooktop’s special features

  • Was this article helpful?