Skip to main content
Fisher & Paykel Product Help

Product & Cabinetry Dimensions

Details the various product and cabinetry dimensions of your built-in oven.

Single Ovens

Product Dimensions


FRONT


PROFILE


PLAN
 

Property (mm)

OB76SD

  1. Overall height of product

689

  1. Overall width of product

760

  1. Overall depth of product (excludes handle and dials)

608

  1. Depth of oven front and control panel (excludes handle and dials)

39

  1. Depth of chassis (does not include oven front)

569

  1. Height of chassis

675

  1. Depth of door (open) (measured from front of door)

530

  1. Overall width of chassis

720

 

Cabinetry Dimensions

FLUSH INSTALLATION
The depth of the control panel (D) is larger than conventional ovens. Ensure you have created a 39 mm recess in cabinetry.

Make sure the cavity is completely sealed with no gaps. This is to ensure the oven cooling system functions correctly.

Property (mm)

OB76SD

  1. Minimum inside width of cavity

724

  1. Overall width of cabinetry

764

  1. Minimum inside height of cavity

681

  1. Overall height of cabinetry

693

  1. Minimum inside depth of cavity

  • Proud install
  • Flush install

575
613

If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer’s instructions.

Double Ovens

Product Dimensions


FRONT

PROFILE

 
PLAN
 

Property (mm)

OB76DD

  1. Overall height of product

1232

  1. Overall width of product

760

  1. Overall depth of product (excludes handle and dials)

608

  1. Depth of oven front and control panel (excludes handle and dials)

39

  1. Depth of chassis (does not include oven front)

569

  1. Height of chassis

1218

  1. Depth of door (open) (measured from front of door)

530

  1. Overall width of chassis

720

 

Cabinetry Dimensions

PROFILE

FLUSH INSTALLATION
The depth of the control panel (D) is larger than conventional ovens. Ensure you have created a 39 mm recess in cabinetry.

If flush installing, you need to replace the lower trim with the supplied long trim at the base of the oven. Refer to Step 11 for instructions.

Make sure the cavity is completely sealed with no gaps. This is to ensure the oven cooling system functions correctly.

Property (mm)

OB76DD

  1. Minimum inside width of cavity

724

  1. Overall width of cabinetry

764

  1. Minimum inside height of cavity

1224

  1. Overall height of cabinetry

1236

  1. Inside depth of cavity

  • Proud install
  • Flush install

575
613

  • Was this article helpful?