Skip to main content
Fisher & Paykel Product Help

First Use

 

 

Your oven comes with two shelves positioned and secured inside

  • The following shows you how to remove and reposition the shelves to your preferred position
  • We recommend you then condition the oven.

 

Remove all cable ties and packaging holding the shelving in place

First Use_Remove Cable Ties.PNG

 

Remove Shelves from the Oven

  1. Remove all the shelving, taking special care with the sliding shelves.
  2. To remove a sliding shelf, grip it at the front (making sure you are gripping the wire shelf and the sliding frame together), lift upwards and pull it out of the oven.

For your safety, the wire shelves and sliding frames are built together as one unit and are not separable. When placed properly on the side racks, the slides will prevent the wire shelves from tilting when pulled towards you.

First Use_Remove Shelves.PNG

To remove the sliding shelf unit, lift up and out

 

Replace Shelving in Your Preferred Positions

To Replace the Wire Shelf:

  • Check the guard rail (as shown) to make sure the shelf is the right way up.
  • Slide it horizontally back along the side racks ensuring it is level and the stop notch is facing down.

First Use_Replace Shelves #1.PNG

Shelf positions

First Use_Replace Shelves #2.PNG

Replacing the wire shelf

First Use_Replace Shelves #3.PNG

Replacing the sliding shelves

 

To Replace a Full Extension Sliding Shelf

  • Position the shelf so that it is level, with the front bar toward you (as shown).
  • Check the guard rail (as shown) to ensure the shelf is the right way up.
  • Ensure the sliding frame is not extended.
  • Position the shelf on top of the side racks, so the rear shelf tag at the back of the sliding frame rests behind the side rack wire (as shown).
Ensure the sliding shelf is positioned on top of the side rack wires rather than between them.
  • Push the sliding shelf all the way to the back of the oven, until the front shelf tag drops into place behind the side rack wire.

We recommend placing the sliding shelves on position 2 or 4.

To prevent the tags from lifting off the side racks, take care to slide the shelves forward horizontally.

 

Illustrative purposes only - oven function indicators may vary.
First Use_Control Panel.PNG

 

Using the Touch Controls

  • Use the ball of your finger, not its tip. The controls respond to touch, so you don’t need to apply any pressure.
First Use_Using touch controls #1.PNG

Locking the Control Panel

This function is to prevent accidental use of the oven (eg by children). When locked the controls are unresponsive and the oven will not turn on.

First Use_Using touch controls #2.PNG

 

To lock:

Touch and hold the select Tick_Select Button for Oven.PNG control until the indicator light comes on.

To unlock:

Touch and hold the cancel X control.

 

Setting the Clock

When your oven is first turned on, or after a power cut, the display will flash . You will need to set the clock in order to use the oven.

Set the Clock #1.PNG Set the Clock #2.PNG
  1. The display will flash 24HR_Small.PNG
  1. Touch the right scroll control to scroll Right Arrow.PNG between 24HR_Small.PNG and 12HR_Small.PNG
  2. Touch the select Tick_Select Button for Oven.PNG control to confirm.
Set the Clock #3.PNG Set the Clock #4.PNG
  1. Touch the left and right scroll Left_Right Arrows.PNG controls to set the time.
  1. Touch the select Tick_Select Button for Oven.PNG control to confirm.
  • The time set will now be steadily lit.

 

Changing the Time

You set the clock within the user preference menu.

Change the Time #1.PNG Change the Time #2.PNG
  1. To enter the user preference menu touch and hold the left and right scroll Left_Right Arrows.PNG controls together for 3 seconds.
  • Either 12HR_Small.PNG or 24HR_Small.PNG will be displayed.
  1. Touch the select Tick_Select Button for Oven.PNG control to confirm. The display will flash.
  1. Touch the right scroll Right Arrow.PNG control to scroll between 24HR_Small.PNG, 12HR_Small.PNG or OFF_Small.PNG to turn the display off (see ‘Setting User preferences’ for more information).
  2. Touch the select Tick_Select Button for Oven.PNG control to confirm.
Change the Time #3.PNG
  1. Touch the left and right scroll Left_Right Arrows.PNG controls to set the time.
  2. Touch the select Tick_Select Button for Oven.PNG control to confirm.

 

Conditioning the Oven

Cond Oven #1.PNG Cond Oven #2.PNG
  1. Select the Bake Bake Function.PNG function.
  • The halo will glow white.
  • Each function has a preset temperature and so the oven will start heating at the Bake preset temperature of 180oC.
  1. Set the temperature to 200oC for 30 minutes.
  • While the oven is heating up, the temperature halo will glow red and the temperature indicator will alternately show the actual and set temperatures.
  • When the oven has reached set temperature, a tone will sound and the halo will turn white.
Cond Oven #3.PNG Cond Oven #4.PNG
  1. After 30 minutes is up, select the Fan Grill Fan Grill_no words.PNG function.
  1. Leave the temperature at 200oC for 5 minutes.
  • The halo will remain white.
  1. Now select the Fan Forced Fan Forced_no words.PNG Function. Leave the temperature at 200oC for 20 minutes.
Cond Oven #5.PNG

 

  1. When you have finished, turn the function dial to Off OFF_Image.PNG. The halos will go out.
  • There will be a distinctive smell and a small amount of smoke during the conditioning process as manufacturing residue is burnt off. This is normal, but make sure the kitchen is well ventilated during the conditioning.
  • Once cooled, wipe out the oven with a damp cloth and mild detergent, and dry thoroughly. 

 

 

 

  • Was this article helpful?