Skip to main content
Fisher & Paykel Product Help

Controls Overview

Details many of the various controls descriptions such as the wash modifier selector, keylock, and more.

Controls Description 
  1. Off/On 
    Press  to turn the dishwasher on or off.
    Half load selector 1/2
    Press and hold  for a second until you hear a beep. The half load indicator will come on.
     
  2. Wash programme selector
    Press  to scroll through the wash programmes.
     
  3. Wash modifier selector
    Press  to scroll through the wash modifier options. (See ‘Setting wash modifiers’)
  1. Start
    Press  once to start the wash.
    To pause:
    Press  again or open the door carefully.
    Delay start 
    Press and hold the button for a second to enter delay start. (See ‘Setting delay start’)
     
  2. Keylock
  • Keylock disables all the buttons so that a wash cannot accidentally be started.
  • Keylock can be activated or canceled at any stage, including while a wash programme is running.

    To activate:
    Press and hold  and  together for a second until you hear a beep. The keylock indicator will come on and remain lit until keylock is canceled.

    To cancel:
    Press and hold  and  together for four seconds until you hear a beep. The keylock indicator will flash and then go out.


 

  1.  Wash program indicators
    These show which programme is selected
     
  2. Half load indicator
    If lit: half load function is activated
     
  3. Wash modifier indicators
    If lit: wash modifier is activated
     
  4. Display
    This shows:
    - the time remaining (minutes)
    - the delay start time (hours)
    - Fault code numbers (see section 'If there is a fault code')
     
  5. Wash progress indicators
    Shows the stage of the wash cycle currently in progress.
     
  6. Keylock indicator
    If lit: keylock is activated.
     
  7. Rinse aid indicator
    If lit: Rinse aid dispenser requires filling.
     
  8. Delay start indicator
    If lit: start is delayed.

 

  • Was this article helpful?