Skip to main content
Fisher & Paykel Product Help

Cavity Preparation

  1. Last updated
  2. Save as PDF

All Guides

2017-07-28_1235.png

2017-07-28_1235-fixed.png
Water Connection

Recommended COLD (Maximum 60°C).
3/4 BSP (GB20) to suit flat washer.

Water Pressure

Water softener models
Max. 1 MPa (145 psi)
Min 0.1 MPa (14.5 psi)

Models without water softener
Max. 1 MPa (145 psi)
Min 0.03 MPa (4.3 psi)
Important-Icon.png
  • The power outlet must be located in a cabinet adjacent to the dishwasher cavity.
  • Adjacent cabinetry must not extend above cavity base

Integrated Models with Remote (NZ AU) Only - Preparation For External Venting Through Same Cabinet

2017-07-28_1250.png

Important-Icon.png

To prevent pooling of condensation from the vent hose, a toekick height of no less than 100 mm is required.

Integrated Models with Remote (NZ AU) Only - Preparation For External Venting Through Adjacent Cabinet

Services can be located either side of dishwasher

Note-Icon.png

The ø60 mm services hole should be enlarged to accomodate the extra venting hose by cutting out some material from the bottom corner.

2017-07-28_1258.png

Important-Icon.png

To prevent pooling of condensation from the vent hose, a toekick height of no less than 100 mm is required.