Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Lists and illustrates the parts supplied with your DishDrawer.

Parts Supplied - All Models

Drain hose support (1)

Drain hose joiner (1)

Wire clip (1)
(for securing Drain hose joiner)

Side mounting bracket kit (A and B) (2)

Clamp (1)
(for securing Drain hose joiner)

Phillips 16 mm screws (7)

38 mm bottom fixing screws & metal washers (2)

Rubber washer for inlet hose (1) (comes already fitted)

Moisture protection tape (1) (to prevent moisture damage)


If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or through our local website listed at the end of this document.

Additional Parts Supplied With Integrated Models

External Venting kit (1)

supplied with Integrated models with remote (NZ AU) only

Panel bracket (1)
(attached to product)

Panel mounting screws (14)

Integrated rectangular badge (1) (Satin chrome supplied)

supplied with Integrated models with badge (GB IE) only

  • Was this article helpful?