Operating Instructions - Starting a Wash

Last updated
Save as PDF

Discard scraps
Scrape large food particles off (e.g. bones, fruit stones) and remove any foreign objects (e.g. toothpicks, strings, paper).

Add detergent
Fill the detergent dispenser (A) with
powdered detergent and close the
dispenser door.

Do not place liquid detergent or
tablets in the detergent dispenser.

If using a tablet or gel pouch, place
it in the cutlery basket (B) or at the
bottom of the drawer.

Load dishes carefully
To help with wash performance, arrange dishes so they are evenly spaced and not nesting.

Check rinse aid
If the indicator on its plug (C) glows
bright red, refill the rinse aid
dispenser (D) with liquid rinse aid.
Make sure you then refit the rinse
aid plug back into its original
position, by rotating the plug back
into an upright position

Check spray arm(s) are mounted correctly and can rotate fully around
Check the spray arm is mounted correctly by physically rotating it around with your hand. Before a wash, ensure there are no items blocking the spray arm(s) from rotating.

Select Wash.JPG

Start or Delay Start.JPG

Select wash
Press Forward Button.JPG to select a wash program.

Start wash or set Delay start

To start wash:
Close the drawer and press Start_Pause Button.JPG OR
Press ► on the control panel before
closing the door
To set delay start:
Press and hold ► to set the delay
start time, then close the drawer.

Each tone indicates a 1h delay.