Parts Supplied
|
Drain Hose Support (1) |
Drain Hose Joiner (1) |
Wire Clip (1) (for securing Drain Hose joiner) |
Clamp (1) (for securing Drain Hose Joiner) |
Side Mounting Bracket Kit (A and B) (2) OPTIONAL |
Top Mounting Brackets (2) OPTIONAL |
|
Phillips 16mm Screws (7) |
38mm Bottom Fixing Screws & Metals Washers (2) |
Rubber Washer for Inlet Hose (1) (comes already fitted) |
Moisture Protection Tape (1) (to prevent moisture damage to cabinetry) |
Cavity Bracket Kit (1) (supplied with Tall Height Models only) |
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website.
Dishdrawer™ Installation Overview
This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.