Skip to main content
Fisher & Paykel Product Help

Parts Supplied

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.

Drain hose
support (1)

Drain hose
joiner (1)

Wire clip (2)
(for securring
Drain hose joiner)

Clamp (1)
(for securing
Drain hose joiner)
 

Side mounting
bracket kit
(A and B) (2)
OPTIONAL
 

Top
mounting
brackets (2)
OPTIONAL
 

Phillips
16 mm
screws (9)

 

Rubber washer
for inlet hose (1)
(comes already
fitted)


Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
 

Hexagonal
socket for feet
adjustment (2)
(long & short)
 

DD60DA models only
Prefinished toekick (1)
and securing pins (4)

DD60DC models only
Prefinished toekick (1)

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.

  • Was this article helpful?