A. Off/On
|
- Press
to turn the dishdrawer™ on or off.
- Opening the drawer will automatically turn the dishwasher on.
|
B. Drawer Selector (Double models only) |
- Press
to scroll between drawers.
|
C. Wash Program Selector |
- Press
to scroll through wash program options.
|
D. Start / Delay Start |
- Press
to start the wash.
- To pause: Press
again. The wash stage indicator Wash and and (Double models) will flash.
- Wait for the 3 short and one long tone before opening the drawer. Forcing it open mid cycle may cause damage or injury.
- If the drawer is not restarted within 7 minutes it will tone intermittently until it is restarted.
|
D. To Delay start  |
- Press and hold until
appears on the display, then release. You are now in Delay start mode.
- Press
until the display shows the number of hours you want to delay the start of a wash by (1 to 12 hours).
 |
If you scroll past 12 hours the dishwasher will exit Delay start mode. To re-enter delay start follow step 1 above. |
- The wash will start once the delay time is over, provided the drawer is
closed.
DD24 models only
- If the drawer is opened after delay start has been set (for example if you need to load more dishes), delay start will be paused after the drawer is closed.
To restart delay start:
- Close the drawer.
- Single models:
will flash.
- Double models:
and will flash.
- Press
to resume.
Cancel wash/Cancel Delay start
- Press to cancel a wash that has already started or to cancel the Delay start setting.
- If there is any water in the drawer, it will automatically drain before the dishwasher turns off.
|
E. Keylock & Childlock |
Keylock
- Keylock disables all the buttons – helpful when cleaning the dishwasher.
Single models
To activate: press and hold until you hear one tone. The keylock indicator will come on.
To cancel: press and hold until you hear another tone and the keylock indicator stops flashing and goes out.
Double models
To activate: press and hold and together until you hear one tone.
The keylock indicator will come on.
To cancel: press and hold and together until you hear another tone and the keylock indicator stops flashing and goes out.
Childlock
- Childlock disables all the buttons and locks the drawer closed, preventing unauthorized use by children.
Single models
To activate: press and hold until you hear a second tone. The keylock indicator will come on.
To cancel: press and hold until you hear another tone and the keylock indicator stops flashing and goes out.
Double models
To activate: press and hold and together until you hear a second tone. The keylock indicator will come on.
To cancel: press and hold and together until you hear another tone and the keylock indicator stops flashing and goes out.
|
F. Wash Program Indicators |
- These show which program is selected.
|
G. Drawer Indicator (Double models only) |
- White: drawer is running and selected.
- Dim: drawer is running but not selected.
- Flashing: drawer is paused
|
H. Display |
- Time remaining (minutes)
- Fault code numbers (see ‘If there is a fault’ in User guide).
|
I. Wash Stage Indicators |
- See ‘During and after the wash cycle’.
|
J. Keylock/Childlock Indicator |
- If lit: keylock or childlock is activated.
|
K. Delayed Start Indicator |
- If lit: delayed start is set.
|
L. Salt Indicator |
- Water softener models only
- If lit: salt reservoir is empty.
|