Skip to main content
Fisher & Paykel Product Help

Installation Method

Now choose which installation method (A) OR (B) is more suitable for your cabinetry...


1-A. Attach side mounting brackets

Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. Ensure they’re securely fitted before sliding product into cavity.

The mounting slots are in pairs, one on each side diagonally across the product. A bracket must match A slot and B bracket must match B slot.

When fitting brackets, ensure the ends are not pushed down into the chassis.

2-A. Pull through hoses & push into the cavity

3-A. Secure the cabinetry on the sides


 

4-A. Optionally secure to the cabinetry above

The top mounting brackets will only bend upwards a maximum of 10mm.

 

5-A. After securing, depending on your model - refer to relevant 'fit the supplied toekick panel' step    

 

Alternative method (B) - Secure by drawer removal


 

1-B. Pull through hoses & push into the cavity


 

2-B. Remove the lower drawer

 

 


Press the release tabs in on either side and push back to release drawer from runners. Lift drawer off runners.

To prevent kinked hoses
Either sit the drawer down on the left hand side (recommended) or rotate the drawer clockwise, resting it on its side after removal.

 

3-B. Secure to the cabinetry on the sides


 

4-B. Optionally secure to the cabinetry above

The top mounting brackets will only bend upwards a maximum of 10mm.

 

5-B. Refit the drawer onto the runners