Skip to main content
Fisher & Paykel Product Help

How to attend to a fault - Integrated models with badge

 


integrated models.png

Wash Program Panel Fault Code Possible Cause of Fault

Screen Shot 2017-06-16 at 9.27.12 AM.png
U1 No water – the water supply hasn’t been turned on.

Screen Shot 2017-06-16 at 9.27.26 AM.png
U4 Fault in the other drawer preventing the use of this drawer.

Screen Shot 2017-06-16 at 9.27.32 AM.png
U6 The spray arm has loosened or come off its mounting, or water pressure is too low
Screen Shot 2017-06-16 at 9.27.39 AM.png E1 Flood detected.
Screen Shot 2017-06-16 at 9.27.44 AM.png E2 Motor fault.

Screen Shot 2017-06-16 at 9.27.48 AM.png
E3 Temperature sensor fault. You may need to have a tempering valve installed on your water supply, to ensure that incoming water is less than 65°C (149°F).
Screen Shot 2017-06-16 at 9.27.55 AM.png E4 Heating element failed.

Screen Shot 2017-06-16 at 9.28.02 AM.png
E5 Fault with the internal lid of the dishwasher.
Screen Shot 2017-06-16 at 9.28.08 AM.png E6 Fault with the drying fan.
Screen Shot 2017-06-16 at 9.28.15 AM.png E7 Electronics fault—detergent dispensing system.

Screen Shot 2017-06-16 at 9.28.26 AM.png
E8 Electronics fault—other systems.
Screen Shot 2017-06-16 at 9.28.32 AM.png E9 Electronics fault—controller.
Screen Shot 2017-06-16 at 9.28.36 AM.png EC Electronics fault—communication between drawers.