Skip to main content
Fisher & Paykel Product Help

Safety and Warnings

Read these instructions carefully before installing this product.

WARNING!

Electrical shock hazard

  • Before installing the dishwasher, remove the house fuse or open the circuit breaker.
  • This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an appropriate outlet that is installed and earthed in accordance with all local codes and ordinances.

Improper connection of the equipment- earthing conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly earthed.

  • Do not modify the power supply plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an extension cord, adapter plug or multiple outlet box.
  • Failure to follow this advice may result in electrical shock or death.

Hot Surface Hazard

  • Take care - panel edges are sharp.
  • Failure to use caution could result in injury or cuts.

 

Important Safety instructions

  • Installation of this dishwasher requires basic mechanical and electrical skills.
  • Be sure to leave these Instructions with the Customer.
  • Installation must comply with your local building and electricity regulations.
  • At the completion of the dishwasher installation, the Installer must perform the 'Final Checklist'.
  • Remove all packaging materials supplied with the dishwasher.
  • This dishwasher is manufactured for indoor use only.
  • Ensure all water connections are turned OFF. It is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Regulations.
  • The dishwasher MUST be installed to allow for future removal from the enclosure if service is required.
  • The switched power outlet must be outside the dishwasher cavity, so that it is accessible after installation.
  • Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to the power supply cord and hoses.
  • If the dishwasher is to be relocated from one installation to another it must be kept upright to avoid damage from water spillage.
  • Make sure only new hoses are used for connection (supplied with the dishwasher). Old hoses should not be reused.
  • Failure to install the dishwasher correctly could invalidate any warranty or liability claims.
  • If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle, boat or mobile facility containing the product to the service shop at your expense or pay the service technician’s travel to the location of the product.

Integrated Models Only 

Fitting integrated front panels requires access to electrical service areas.
This work must be performed and certified by a qualified electrical service technician.

Electrical Shock Hazard

To reduce the risk of electrical shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation.

  • Before fitting the front panels and connecting the integrated badges (where present), the installer must ensure that the dishwasher is disconnected from the power supply.
  • After installing the front panels, the installer must ensure that the following components are electrically earthed: the panel bracket, the integrated badge (where present) and any custom metal component (e.g. handle) that extends past the rubber seal.
  • Failure to follow these warnings may result in electrical shock, injury or fire.

Important Safety instructions

  • Read these instructions completely and carefully.
  • Ensure the product is not plugged in.
  • Installation of custom panels requires basic mechanical and electrical skills.
  • Installation must comply with your local building and electricity regulations.
  • Failure to install the custom panels correctly could invalidate any warranty or liability claims
  • Was this article helpful?