Operating Instructions

Pause wash

You can only pause the wash with the remote. See opposite.

Cancel wash

1. Pause the wash with the remote.
2. Open the drawer, then press and hold until you hear a quick double beep.

Any water in the drawer will automatically drain when you close it.

Set Delay start

To delay the start of a wash by 1 to 12 hours:

• Press and hold . Count the beeps as the dishwasher emits them (each represents 1 more hour of delay) and release the button when you have reached the desired delay time.
• The indicator of the selected wash program will flash to show that Delay start has been set.
• The wash will start once the delay time is over, provided the drawer is closed.

Cancel Delay start

Press and hold until you hear a quick double beep and the indicator of the selected wash program goes out.

Pause wash

Press .

After pausing a wash, wait for 3 beeps before opening the drawer. Forcing it open in mid-cycle may cause damage or injury.

Cancel wash

Press and hold until you hear a quick double beep.

Any water in the drawer will automatically drain.

Set Delay start

You can only set Delay start on the drawer control panel. See opposite.

Cancel Delay start