Skip to main content
Fisher & Paykel Product Help

Your remote control

  1. Last updated
  2. Save as PDF

 

Important-Icon.png

To prevent unauthorized use, keep the remote control out of reach of children.

Signal indicator

  • A single flash indicates a successful signal to the dishwasher.
  • Multiple flashes indicate that the dishwasher cannot read the signal. The remote control may be out of range.
 2017-07-03_1131.png

‘Battery low’ indicator

When this flashes, the battery needs to be replaced. Use a CR2032 battery, ensuring the + symbol faces up.

2017-07-03_0111.png

Control button(s)

See section ‘Operating instructions’ for information.

Mounting your remote

Your remote control comes supplied with a detachable mounting bracket and self adhesive strip. You can choose to affix this bracket on a nearby surface, which should be out of direct sunlight and away from excessive heat and steam. Do not apply on wallpaper.

 Doubles remote shown

2017-07-03_0106_360-fixed.png

Peel red liner off, press adhesive to bracket

2017-07-03_0107_360-fixed.png

Peel black liner off

2017-07-03_0108.png

Press remote & bracket to clean, dry surface for 10 seconds

2017-07-03_0109.png

Slide off remote, then press bracket firmly to surface for 30 seconds. Wait 1 hour before refitting remote.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Appliance
    Clean - Double DishDrawer (Integrated)
    Article type
    Topic
    Manual
    Quick Start Guide
  2. Tags
    This page has no tags.