Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Lists and illustrates the parts supplied with your DishDrawer.
2017-07-27_1333.png
Drain hose
support (1)
2017-07-27_1334.png
Drain hose
joiner (1)
2017-07-27_1335.png
Wire clip (2)
(for securing
Drain hose joiner)
2017-07-27_1336.png
Clamp (1)
(for securing
Drain hose joiner)

 
asfadgaga.png
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
 
2017-07-27_1337.png
Top
mounting
brackets (2)
OPTIONAL
 
dgagagg.png
Phillips
16 mm
screws (9)

 
2017-07-27_1338.png

Rubber washer
for inlet hose (1)
(comes already
fitted)

2017-07-27_1339.png
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)

 
sadgadfh.png
Hexagonal
socket for feet
adjustment (2)
(long & short)
 

2017-08-04_1019.png

Prefinished toekick (1)

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.

The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.

 

Additional Parts Supplied with Integrated Models

2017-08-07_1224revised.png

Panel bracket (2)

(attached to product)

dgagagg.png

Panel mounting screws (12)

2017-08-07_1233.png

Toekick mounting bracket (1)

(A custom toekick panel of any material with thickness 9 - 19 mm can be screwed to the plastic toekick mounting bracket)

dgagagg.png

Toekick mounting screws (5)

2017-08-07_123lksyjs.png

Integrated rectangular badge (2)

(Satin chrome supplied)

2017-08-07_1234.png supplied with Integrated models with badge (GB IE) only

  • Was this article helpful?