Controls & Display

• Opening the drawer will automatically turn the dishwasher on.
• Single models:   Press  to turn the dishdrawer on or off.
• Double models:  Press to turn the dishdrawer on.

                                Press and hold to turn the dishdrawer off.

• Press  to scroll between drawers.

• Press  to scroll through wash program options.

• Press to scroll through the wash modifier options.

Not all modifiers are available for all wash programs.

• Press to start the wash.
• To pause: Press  again. The wash stage indicator Wash and and (Double models) will flash.
• Wait for the 3 short and one long tone before opening the drawer. Forcing it open mid cycle may cause damage or injury.
• If the drawer is not restarted within 7 minutes it will tone intermittently until it is restarted.

• Press and hold until   appears on the display, then release. You are now in Delay start mode.
• Press  until the display shows the number of hours you want to delay the start of a wash by (1 to 12 hours).

If you scroll past 12 hours the dishwasher will exit Delay start mode. To re-enter delay start follow step 1 above.

• The wash will start once the delay time is over, provided the drawer is closed.

DD24 models only

• If the drawer is opened after delay start has been set (for example if you need to load more dishes), delay start will be paused after the drawer is closed.

To restart delay start:

• Close the drawer.
• Single models:   will flash.
• Double models:  and  will flash.
• Press   to resume.

Cancel wash/Cancel Delay start

• Single models:
• Press to cancel a wash that has already started or to cancel the Delay start setting.
• Double models:
• Press and hold to cancel a wash that has already started or to cancel the delay start setting.
• If there is any water in the drawer, it will automatically drain before the dishwasher turns off.

Keylock

• Keylock disables all the buttons – helpful when cleaning the dishwasher.
• To activate: press and hold  and together until you hear one tone.  The keylock indicator  will come on.
• To cancel: press and hold  and  together until you hear another tone and the keylock indicator stops flashing and goes out

Childlock

• Childlock disables all the buttons and locks the drawer closed, preventing unauthorized use by children.
• To activate: press and hold  and  together until you hear a second tone. The keylock indicator  will come on.
• To cancel: press and hold  and  together until you hear another tone and the keylock indicator stops flashing and goes out.

• These show which program is selected.

• White: drawer is running and selected.
• Dim: drawer is running but not selected.
• Flashing: drawer is paused

• Time remaining (minutes)
• Fault code numbers (see ‘If there is a fault’ in User guide).

• See ‘During and after the wash cycle’.

• If lit: keylock or childlock is activated.

• If lit: delayed start is set.

• Water softener models only
• If lit: salt reservoir is empty.

• If lit: wash modifier is selected.