Preference Options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.
| Option | Rinse Aid |
Water Softener (Some Models Only) |
Open Drawer Auto Power-On (suitable as a Sabbath Option) | Turn Tones OFF | Closed Drawer Autolock |
|---|---|---|---|---|---|
| What Does it do? | Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash. |
Refer to the ‘Water softener’ section of the ‘User guide’ for details. |
Your dishwasher is factory-set automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off. | This turns all tones off except for fault alerts. | When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be unlocked by pressing  (unless Keylock or Childlock is also activated). Useful in boats or motor homes. |
How to Change the Setting of an Option
1. CHECK
- Check that there is no wash underway, press
2. ENTER MENU & SCROLL TO OPTION
To enter the menu: Press and hold the 
and 
together for four seconds.
- You are now in the Rinse aid option of the preference options menu.
- If you want to change the Rinse aid setting, go to step 3 now.
- If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below).
When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
| Option | Rinse Aid |
Water Softener (Some Models Only) |
Open Drawer Auto Power-On (suitable as a Sabbath Option) | Turn Tones OFF | Closed Drawer Autolock |
|---|---|---|---|---|---|
| Which Option am I in? |  |
 |
 |
 |
 |
| Possible Settings | Off to Max (rA5) | Off to Max (Hd5) | On or Off | On or Off | On or Off |
| Example |
setting is 1 setting is 4
|
setting is 1
setting is 4
|
On Off |
On Off
|
On Off |
3. CHANGE SETTING
- Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press 3 times.
4. SAVE SETTING & QUIT MENU
- Press . This will save the new setting and quit the preference options menu.