Skip to main content
Fisher & Paykel Product Help

Choose your Installation Method A or B

 

(Frameless Cabinetry Only)

Install Method A.JPG

Attach Side Mounting Brackets

Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. Ensure they’re securely fitted before sliding product into cavity.

Install Method A - Attach side brackets.JPG

When fitting brackets, ensure the ends are not pushed down into the chassis.

Pull Through Hoses & Push Into the Cavity

Install Method A - Pull through hoses.JPG

Secure to the Cabinetry on the Sides

Install Method A - Secure Cabinetry on sides.JPG

Optionally Secure to the Cabinetry Above

Install Method A - Optionally Secure to cabinetry above.JPG

After Securing, Depending on your Model - Refer to Relevant "Fit the Supplied Toekick Panel" Step.

 

Alternative Method (B) - Secure by Drawer Removal

Pull Through Hoses & Push into the Cavity

Install Method B - Pull through hoses.JPG

Remove the Lower Drawer

Install Method B - Remove the Lower Drawer.JPG

 

Secure to the Cabinetry on the Sides

Install Method B - Secure to the Cabinetry.JPG

Optionally Secure to the Cabinetry Above

Install Method B - Optionally Secure to cabinetry above.JPG

Refit the Drawer onto the Runners

Install Method B - Refit the Drawer onto the runner.JPG

After Securing, Depending on your Model - Refer to Relevant "Fit the Supplied Toekick Panel" Step.