Getting Started Quickly
WM1490F Model Only
|
Sort your washing carefully. Separate white/light colours from dark colours. Wash new, highly coloured and dark coloured items separately to prevent dye transfer. Refer to the ‘Sorting and loading’ section. ● Load your clothes individually into the wash drum. Close the door. ● Use ‘Low Sudsing’ or ‘Front Loader’ liquid, powder or pods. Place liquid detergent into the correct compartment in the dispenser drawer marked ● If you wish to use fabric softener, place it in the compartment marked with a
|
Liquid detergent in compartment marked |
||
|
Fabric softener in compartment marked |
. If you wish to use powdered detergent you MUST remove the liquid detergent insert by firmly grasping and twisting the left hand side of the internal compartment and pulling upwards. If you are using detergent pods place them at the back of the drum before you load your clothing. For more information on detergent refer to the ‘Detergent and fabric softener’ section.
. For more information on fabric softener refer to the ‘Detergent and fabric softener’ section.
|
WM1490F model |
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch
to start the cycle.
- If you make an invalid selection the washer will beep to alert you.
- When the cycle finishes, your washer will perform end of cycle beeps and then turn off automatically.
- If you wish to stop your washer at any point during a cycle simply touch to pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the button then select the new cycle. Touch to restart the washer.
- For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
- Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.
 |
WM1490P and WM1480P Models Only
|
Sort your washing carefully. Separate white/light colours from dark colours. Wash new, highly coloured and dark coloured items separately to prevent dye transfer. Refer to the ‘Sorting and loading’ section. ● Load your clothes individually into the wash drum. Close the door. ● Use ‘Low Sudsing’ or ‘Front Loader’ liquid, powder or pods. Place liquid detergent into the correct compartment in the dispenser drawer marked ● If you wish to use fabric softener, place it in the compartment marked with a
|
Liquid detergent in compartment marked |
||
|
Fabric softener in compartment marked |
. If you wish to use powdered detergent you MUST remove the liquid detergent insert by firmly grasping and twisting the left hand side of the internal compartment and pulling upwards. If you are using detergent pods place them at the back of the drum before you load your clothing. For more information on detergent refer to the ‘Detergent and fabric softener’ section.
|
WM1490P and WM1480P models |
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch to start the cycle.
- If you make an invalid selection the washer will beep to alert you.
- When the cycle finishes, your washer will perform end of cycle beeps and then turn off automatically.
- If you wish to stop your washer at any point during a cycle simply touch to pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety Features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the button then select the new cycle. Touch to restart the washer.
- For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
- Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.
 |
WM1280J Models Only
|
Detergent in compartment marked 2 |
||
|
Fabric softener in compartment marked |
. For more information on fabric softener refer to the ‘Detergent and fabric softener’ section.
|
WM1280J models |
- Press ‘POWER’ to activate your washer.
- Select your wash cycle by turning the SmartTouch™ Control Dial.
- Choose your wash options, if you wish to select options different from the default options for the cycle.
- Touch to start the cycle.
- If you make an invalid selection the washer will beep to alert you.
- When the cycle finishes, your washer will perform end of cycle beeps and then turn off automatically.
- If you wish to stop your washer at any point during a cycle simply touch to pause the cycle. There may be a slight delay while the drum comes to a stop, then the door will unlock. Under certain conditions however the door will remain locked for safety reasons (refer to the ‘Safety Features’ section).
- If you wish to cancel or change the wash cycle once a cycle has started, simply touch the button then select the new cycle. Touch to restart the washer.
- For the best fabric and colour care, remove your clothes as soon as the cycle has finished.
- Failure to follow the advice in this guide may result in damage to your garments and your expectations of wash performance may not be met.
 |