Skip to main content
Fisher & Paykel Product Help

Not Starting

 

Possible Cause What to Do

Dishwasher door open

Make sure the door is fully closed before starting.

Keylock turned on

Turn off Keylock as per your User Guide as this function locks the controls.  Also refer to Video: How to set Keylock

Power supply is not connected. Connect the power supply.
The drawer is not closed properly. Ensure the drawer is firmly closed.
Models with three buttons on the front only: Keylock or Childlock feature is on. Turn the Keylock or Childlock off. Hold down the / button until the symbol disappears from the display or the light above the / button goes out. Also refer to Video: How to Use Keylock
Keylock or Childlock feature is on. Turn the Keylock or Childlock off. See your Quickstart guide for instructions.  Also refer to Video: How to Use Keylock
Button not pressed. Press the button.
Dishdrawer is in "Showroom mode".

Show room mode can be exited by turning the power button off on the display , then pressing and
holding the POWER Start Button.JPG and START/PAUSE Start_Pause Button.JPG button for 5 seconds.

The showroom mode will survive a power off at the wall socket, and needs to be manually removed to operate correctly.

 

 

  • Was this article helpful?