Skip to main content
Fisher & Paykel Product Help

Parts Supplied


Screen Shot 2018-01-05 at 9.34.21 AM.png
Dual Wok Pan support
(Models with a dual Wok only)
Screen Shot 2018-01-05 at 9.34.27 AM.png
Pan Support
(not supplied with Dual wok models)
Screen Shot 2018-01-05 at 9.34.38 AM.png
Mini wok pan support (1)
(CG604D only)
Screen Shot 2018-01-05 at 9.34.43 AM.png
Small pan support
(some models only)
Screen Shot 2018-01-05 at 9.34.48 AM.png
Wok Stand (1)
Screen Shot 2018-01-04 at 5.09.59 PM.png
Fibre Washer (1)
Screen Shot 2018-01-04 at 5.10.03 PM.png
Elbow 1/2" BSP
external thread (1)
Screen Shot 2018-01-04 at 5.10.09 PM.png
Clamping brackets (4)
and screws (4)
Screen Shot 2018-01-04 at 3.01.33 PM.png
LPG test point adaptor (1)
(LPG models only)


Installing Multiple Products

We recommend installing multiple products in separate cutouts, with a minimum 5 mm space between the glass edges of the adjacent products. If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.

The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.

If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance

  • Was this article helpful?