Parts Supplied
![]() Dual Wok Pan support (Models with a dual Wok only) |
![]() Pan Support (not supplied with Dual wok models) |
![]() Mini wok pan support (1) (CG604D only) |
![]() Small pan support (some models only) |
![]() Wok Stand (1) |
![]() Fibre Washer (1) |
![]() Elbow 1/2" BSP external thread (1) |
![]() Clamping brackets (4) and screws (4) |
![]() LPG test point adaptor (1) (LPG models only) |
Installing Multiple Products
We recommend installing multiple products in separate cutouts, with a minimum 5 mm space between the glass edges of the adjacent products. If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website listed at the end of this document.
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance