Skip to main content
Fisher & Paykel Product Help

Parts Supplied

 

 

Parts Req - Drain Hose.JPG

Drain Hose Support (1)

Drain Hose Joiner - Single.JPG

Drain Hose Joiner (1)

Wire Clip - Single.JPG

Wire Clip (1)

(for securing Drain Hose joiner)

Parts Req - Clamp.JPG

Clamp (1)

(for securing Drain Hose Joiner)

Parts Req - Side Mounting Bracket Kit.JPG

Side Mounting Bracket Kit (A and B) (2)

OPTIONAL

Parts Req - Top Mounting Bracket.JPG

Top Mounting Brackets (2)

OPTIONAL

Parts Req - Phillips 16mm Screws.JPG

Phillips 16mm Screws (7)

Bottom Fixing Screws - Single.JPG

38mm Bottom Fixing Screws & Metals Washers (2)

Parts Req - Washer.JPG

Rubber Washer for Inlet Hose (1)

(comes already fitted)

Parts Req - Moisture protection Tape.JPG

Moisture Protection Tape (1)

(to prevent moisture damage to cabinetry)

Cavity Bracket - Single.JPG

Cavity Bracket Kit (1)

(supplied with Tall Height Models only)

 

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website.

 

Dishdrawer™ Installation Overview

This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used as a guide on how to install a DishDrawer™ yourself. https://vimeo.com/325297597

 

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.

 

 

 

  • Was this article helpful?