Skip to main content
Fisher & Paykel Product Help

Installation Method

Now choose which installation method (A) OR (B) is more suitable for your cabinetry...

2017-07-28_1002.png

1-A. Attach Side Mounting Brackets

Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. Ensure they’re securely fitted before sliding product into cavity.

2017-07-28_1004_720-fixed.jpg

The mounting slots are in pairs, one on each side diagonally across the product. A bracket must match A slot and B bracket must match B slot.
 

2-A. Integrated models with remote only - Attach venting hose

Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.

2017-07-28_1215_720-fixed.jpg
 

3-A. Pull through hoses & move into the cavity
2017-07-28_1217_720-fixed.jpg

As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.

Important-Icon.png

If product cannot be pushed in far enough, pull out again and rearrange hoses and cord. Do not use excessive force, as doing so may squash the hoses and lead to incorrect operation.


4-A. Secure the drawer
2017-07-28_1223.png  
5-A. Integrated models with remote only - Secure the external vent

2017-07-28_1225.png

After routing the vent hose through and out the hole cutout, attach and secure the vent by tightening the four screws provided.
 

Alternative method (b) - Secure by drawer removal

2017-07-28_1229.png

1-B. Integrated models with remote only - Attach venting hose

Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.

2017-07-28_1230_720-fixed.jpg

 

2-B. Pull through hoses & move into the cavity
2017-07-28_1236_720-fixed.jpg

As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted.

Important-Icon.png

If product cannot be pushed in far enough, pull out again and rearrange hoses and cord. Do not use excessive force, as doing so may squash the hoses and lead to incorrect operation.


3-B. Remove the drawer

Product may move. Mark chassis position on cavity

2017-07-28_1245-fixed1.1.jpg

Press the release tabs in on either side and push back to release drawer from runners

2017-07-28_1245-fixed2.jpg

To prevent kinked hoses, we recommend rotating the drawer anti-clockwise and resting it on its side after removal.

2017-07-28_1245-fixed3.jpg

Push drawer runners back in.

4-B. Secure the drawer to the cabinetry

The product has three pairs of fixing points 

2017-07-28_1257_720-fixed.jpg

5-B. Refit the drawer onto the runners

2017-07-28_1301.png
 

6-B. Integrated models with remote only - Secure the external vent

2017-07-28_1303_720-fixed.jpg

After routing the vent hose through and out the hole cutout, attach and secure the vent by tightening the four screws provided.