Skip to main content
Fisher & Paykel Product Help

Integrated Models with Badge Only - Custom Front Panel Calculations

Details and illustrates the front panel specifications for integrated models with badge.

Front Panel Specifications

  • 16 -20 mm panel thickness
  • Maximum weight of panel: 9 kg
  • Adequately sealed to withstand moisture (50°C @ 80% RH). Because of it being a hot and wet environment generally, the back and sides of the panel should be completely sealed with a waterproof vapour barrier (ie polyurethane) to prevent damage to the panel.
  • The back of the panel (including any integrated handle) should be completely flush so that the seal between the panel and the rubber trim is maintained.

2017-08-07_1046.png
The following calculations assume the top of the panel is aligned with the top of the adjacent cabinetry:

Width of the Panel

Measure A (the width between adjacent door/drawer fronts) and write it in the first box below, then complete the equation.Screen Shot 2017-08-02 at 4.30.09 PM.png

Height of the Panel

Measure B and write it in the first box below, then complete the equation.
Screen Shot 2017-08-02 at 4.19.27 PM.png

Note-Icon.png

When the top of the dishwasher has to be lower than the adjacent cabinetry, the panel can be increased in height.

  • Was this article helpful?