Parts Supplied
|
Drain hose support (1) |
Drain hose joiner (1) |
Wire clip (1) (for securing Drain hose joiner) |
Side mounting bracket kit |
Clamp (1) (for securing Drain hose joiner) |
|
Phillips 16 mm screws (7) |
38 mm bottom fixing screws & metal washers (2) |
Rubber washer for inlet hose (1) (comes already fitted) |
Moisture protection tape (1) (to prevent moisture damage) |
Cavity bracket kit (1) supplied with Tall height Designer and Integrated models only |
If the Drain hose supplied is not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose by 3.6m. The kit is available from the nearest Fisher & Paykel Authorised Service Centre or through our local website listed at the end of this document.
|
External Venting kit (1) |
Panel bracket (1) (attached to product) |
Panel mounting screws (6) |
Integrated rectangular badge (1) (Satin chrome supplied) |
supplied with Integrated models with remote only 
supplied with Integrated models with badge only