Skip to main content
Fisher & Paykel Product Help

Plumbing & Drainage Options

 

 

 

Option 1

Dishwasher and Ø 38 mm Standpipe

  • Screw Drain hose support to back wall at correct height.
  • If space is limited for fixing, push hose through drain hose support to required height.

Plumbing & Drainage Opt - Double Standpipe.JPG

Ensure that drain hose is installed as close to the underside of the benchtop as possible. This will ensure no waste re-enters the drain hose in the event of poor flow or a blockage in the plumbing.

Ensure the drain hose does not extend into water retained in the trap; an air gap is required to prevent waste water from siphoning back into the tub.

Ensure that drain connection complys with local plumbing regulations.

Option 2

Dishwasher using drain hose joiner onto sink trap/waste tee

  • Screw Drain hose support to back wall at correct height.
  • If space is limited for fixing, push hose through drain hose support to required height.
  • Supplied drain hose joiner to suit 19 mm waste tee.

Plumbing & Drainage Opt - Drain Hose Joiner.JPG

Ensure drain hose is routed straight to joiner. Remove excess drain hose material if necessary.

Do not shorten the inlet hose.