Skip to main content
Fisher & Paykel Product Help

Parts Supplied




Parts Req - Drain Hose.JPG

Drain hose
support (1)

Parts Req - Drain Hose Joiner.JPG

Drain hose
joiner (1)

Parts Req - Wire Clip.JPG

Wire clip (2)
(for securing
Drain hose joiner)

Parts Req - Clamp.JPG

Clamp (1)
(for securing
Drain hose joiner)

Parts Req - Side Mounting Bracket Kit.JPG

Side mounting
bracket kit
(A and B) (2)

Parts Req - Top Mounting Bracket.JPG

brackets (2)

Parts Req - Phillips 16mm Screws.JPG

16 mm
screws (9)

Parts Req - Washer.JPG

Rubber washer Prefinished toekick (1)
for inlet hose (1)
(comes already

Parts Req - Moisture protection Tape.JPG

Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)

Parts Req - Hexagonal.JPG

socket for feet
adjustment (2)
(long & short)

Parts Req - DD60DC toekick.JPG

Prefinished toekick (1)



Parts Req - Double_Panel Bracket.JPG

Panel bracket (2)
& Knock-to-Pause Module (2)
(shipped fixed to product)

Part Req - Panel Mounting Screw.JPG

Panel mounting
screws (12)

Part Req - Toekick Panel Cutting Template.JPG

Toekick panel cutting template (1)
(To enable a custom toekick panel to be
cut to fit the product profile dependant
on the depth of the toekick )

Parts Req - Toekick Mounting Bracket.JPG

Toekick mounting bracket (1)
(A custom toekick panel of any material
with thickness 9 - 19mm can be screwed
to the Toekick mounting bracket)

Parts Req - Toekick Mounting Screws.JPG

screws (5)


If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our website.


Dishdrawer™ Installation Overview

This video provides an overview of what is needed to install a DishDrawer™. It is intended as an overview only of the installation process and is not intended to be used as a guide on how to install a DishDrawer™ yourself.




  • Was this article helpful?