Skip to main content
Fisher & Paykel Product Help

Parts Supplied

Lists and illustrates the parts supplied with your DishDrawer.

Drain hose
support (1)

Drain hose
joiner (1)

Wire clip (2)
(for securing
Drain hose joiner)

Clamp (1)
(for securing
Drain hose joiner)


Side mounting
bracket kit
(A and B) (2)

brackets (2)

16 mm
screws (9)


Rubber washer
for inlet hose (1)
(comes already

Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)


socket for feet
adjustment (2)
(long & short)

Prefinished toekick (1)

If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.

The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.


Additional Parts Supplied with Integrated Models

Panel bracket (2)

(attached to product)

Panel mounting screws (12)

Toekick mounting bracket (1)

(A custom toekick panel of any material with thickness 9 - 19 mm can be screwed to the plastic toekick mounting bracket)

Toekick mounting screws (5)

Integrated rectangular badge (2)

(Satin chrome supplied)

 supplied with Integrated models with badge (GB IE) only

  • Was this article helpful?