|Possible Cause||What to Do|
When the end of the drain hose is lower than the water level inside your washer, water drains or ‘siphons’ as your washer fills. Check the drain hose is inserted into the standpipe by no more than 20mm. The standpipe should be 800-1200mm in height. Refer to 'Installation Instructions' in your User Guide for further information.
|Drain hose not connected to standpipe or tub.||Connect drain hose correctly refer to Draining in the 'Installation Instructions' of your User Guide.|
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us