Skip to main content
Fisher & Paykel Product Help

Control Panel

 

 

DE7060M, DE6060M and DE5060M models

 

Control Panel.PNG

 

1 POWER Press to turn the dryer on/off.
2 Keylock Touch and hold for 3 seconds to disable all buttons on the display panel, except ‘POWER’ Start Button.JPG button. This prevents accidental button presses.
3 Drying cycles

Select your desired drying cycle.

  • Red LED illuminates to indicate the selected drying cycle.
4 Digital display screen

Shows the following:

  • Delayed start time of the drying cycle.
  • Notifications if an error is detected or a warning is necessary.
5 Delay Start

Press to increase the delay start time for drying cycles.

Delay start is not available for time dry cycles.
6 Progress lights The progress lights indicate what stage of the cycle the dryer is currently at (‘Damp’, ‘Dry’ or ‘Cooling’). All three lights are on at the beginning of the cycle. The light for the current stage of the cycle flashes, and each one goes out when that stage of the cycle is complete.
7 Dryness Level Allows you to select the level of dryness for your load.
8 Dry Temp Allows you to select the drying temperature for your cycle.
9 START/PAUSE Press to start or pause the selected drying cycle.
10 Lint Filter The lint filter light will flash when the machine is switched on as a reminder to clear the lint filter before each cycle.

 

DE5060MU Models

 

Control Panel_DE5060MU Models.PNG

 

1 POWER Press to turn the dryer on/off.
2 Keylock Press for two seconds to disable all buttons on the display panel, except ‘POWER’ Start Button.JPG. This prevents accidental button presses.
3 Drying cycles

Select your desired drying cycle.

  • Red LED illuminates to indicate the selected drying cycle.
4 Digital display screen

Shows the following:

  • Delayed start time of the drying cycle.
  • Notifications if an error is detected or a warning is necessary.
5 Delay Start

Press to increase the delay start time for drying cycles.

Delay start is not available for time dry cycles.
6 Progress lights The progress lights indicate what stage of the cycle the dryer is currently at (‘Damp’, ‘Dry’ or ‘Cooling’). All three lights are on at the beginning of the cycle. The light for the current stage of the cycle flashes, and each one goes out when that stage of the cycle is complete.
7 Dryness Level Allows you to select the level of dryness for your load.
8 Dry Temp Allows you to select the drying temperature for your cycle.
9 START/PAUSE Press to start or pause the selected drying cycle.
10 Lint Filter The lint filter light will flash when the machine is switched on as a reminder to clear the lint filter before each cycle.

 

DE4560M Models

 

Control Panel_DE4560M Models.PNG

 

1 POWER Press to turn the dryer on/off.
2 Keylock Press for two seconds to disable all buttons on the display panel, except ‘POWER’ Start Button.JPG. This prevents accidental button presses.
3 Drying cycles

Select your desired drying cycle.

  • Red LED illuminates to indicate the selected drying cycle.
4 Digital display screen

Shows the following:

  • Delayed start time of the drying cycle.
  • Notifications if an error is detected or a warning is necessary.
5 Progress lights The progress lights indicate what stage of the cycle the dryer is currently at (‘Damp’, ‘Dry’ or ‘Cooling’). All three lights are on at the beginning of the cycle. The light for the current stage of the cycle flashes, and each one goes out when that stage of the cycle is complete.
6 START/PAUSE Press to start or pause the selected drying cycle.
7 Lint Filter The lint filter light will flash when the machine is switched on as a reminder to clear the lint filter before each cycle.

 

Timed Programmes (Time Dry)

When a timed cycle is selected the machine dries for the selected time regardless of the level of moisture in the load. It is important to check the items throughout the timed programmes to avoid over drying.

To adjust the length of timed cycles (DE7060M, DE6060M, DE5060M and DE5060MU):

  • Press ‘Time Dry’.
  • Press ‘Delay Start Plus_Higher Button.PNG.

To adjust the length of timed cycles (DE4560M):

  • Press ‘Time Dry’ to scroll through the time selections available.

Time to Go

If you have selected one of the ‘Time Dry’ cycles your dryer displays approximately how many minutes the cycle has remaining.

The word Auto.PNG is displayed on the screen for automatic cycles.

Dryer Controls_Time to Go.PNG

Time to go

Airing/Cool Down (Cooling)

When the dryer has sensed that the load is dry it will automatically go into an airing or cool down cycle. During ‘Cooling’ the drum tumbles and cool air is blown through the clothes. This cools the load to reduce creasing if the clothes are left in the dryer.

Drying Cycle Options_Cooldown Mode.PNG

Cool down mode

 

Keylock

This option enables you to deactivate the buttons on the display panel, except for the ‘POWER’ Start Button.JPGand Single_PadLock.JPG. This option helps prevent accidental button presses.

To turn Keylock ON or OFF, at any time when the dryer is powered on:

  • Press Single_PadLock.JPG for two seconds.
When activated, the light next to the **Insert Image** is illuminated.

If Keylock is activated and the dryer is powered off:

  • To turn your dryer on, press ‘POWER’ Start Button.JPG, then press Single_PadLock.JPG for two seconds to turn Keylock off. Select your drying cycle, any options and then press Start_Pause Button.JPG to start the cycle.

 

 

 

  • Was this article helpful?