Skip to main content
Fisher & Paykel Product Help

First Use

 

 

Using the Wire Shelf

  • To remove the wire shelf, pull it towards you until it stops and then lift, by pulling upwards, until it comes completely out.
  • To insert the wire shelf, slide it in at an angle of 45° until it locks and then lower it horizontally and push it all the way in.
  • If the wire shelf has a low drip tray, to remove it, lift it slightly and slide it towards you.

Using the Perforated Tray

This tray is used for steam cooking and is positioned on the flat grill together with its support. We recommend also using it in combination with the drip tray to catch everything the drips from the food during cooking.

First Use_Wire Shelf_Baking Pan.PNG

Wire shelf and baking pan

First Use_Perforated Tray.PNG

Perforated tray

First Use_Meat Probe.PNG

Meat probe (some models only)

First Use_Perforated Tray with Lid.PNG

Perforated tray with lid

 

First Use_Display&Keypad.PNG

 

Keypad

To operate the keypad, press gently. The keypad will not work if more than one key is pressed at the same time.

Movement Arrows.PNG Movement arrows
X.PNG Cancel and return to previous display page. Keep pressed to return to Home screen.
Start_Power Button.JPG Switches the oven on and off.
Tick_Select Button for Oven.PNG Confirms the settings and starts cooking operations. When pressed during a cooking operation, the function is placed in pause. Press again to restart.
Timer.PNG To set the timer. Enter the functions menu during cooking.
Light #4.PNG Switches the inner oven light on and off.

 

Error Codes

Error codes appear when a fault has been detected. When the error appears, the current function is blocked. If the type of error is related to a safety function, the oven becomes unusable and you will need to contact Customer Care. If the error relates to a minor fault, after being restarted the oven can be used for the functions that do not involve the faulty part (eg a heating element).

 

Beeps

  • Confirms that the command has been received after a key has been pressed.
  • It also indicates that a time function has been completed (eg Timer or Automatic Cooking).
  • When using the recipe function a beep will indicate that the oven is waiting for operation by the user (eg insert a dish).
  • Beeps will also signal that there is an oven fault.

 

Default Temperature

The cooking modes automatically select a suitable temperature when the cooking mode is selected, the temperature can be modified at any time. 

 

F Failure Number Codes

Failure codes appear when the error code is recorded in the Error Log in the Setup menu. This error can be communicated to the service technician so they can understand the possible cause of the problem in advance.

 

Timer

Important-Icon.png The timer on your oven does not turn the appliance on or off. If you want to turn the oven off automatically, please refer to the automatic cooking section to use the end-of-cooking or delayed cooking function.
Note-Icon.png Pressing the Start_Power Button.JPG button does not reset or stop the timer.
  1. Press Timer.PNG and set the desired time using the arrows Up_Down Arrows.PNG and confirm by pressing Tick_Select Button for Oven #2.PNG. To switch the selection between hours and minutes use the arrows Left_Right Arrows.PNG.
  2. The timer can be set from 1 minute to 12 hours and 59 minutes. When set, the remaining time is always visible in the status bar until the time expires or is reset.
  3. To change or cancel the time set, you must reset the timer by pressing and holding Timer.PNG for a few seconds.
  4. The timer format is usually HR:MIN, and switches to MIN:SEC during the last minute.
  5. When the time expires, the display shows 00:00 and an alert will sound for one minute or until Timer.PNG is pressed.

 

Preheat

  • When preheating, the current temperature is displayed together with the thermometer icon.
  • When the set temperature is reached, the control sounds an ‘end of preheat’ beep and the current temperature value disappears from the display.

 

High Altitude Baking

When cooking at high altitude, recipes and cooking time will vary from the standard.

 

First Use and User Settings

When using your oven for the first time, you will be prompted to enter user settings for:

  • Time
  • Date
  • Language
  • Temperature and weight measurements

These settings can be modified at anytime by accessing the settings menu.

 

 

 

  • Was this article helpful?