Skip to main content
Fisher & Paykel Product Help

Menu Settings

 

 

Rinsing

Use this function to deliver hot water from the coffee spouts and steam wand, to clean and heat the appliance’s internal circuit. Place a container under the coffee and hot water spouts.

Do not leave the appliance unattended while hot water is being delivered.
  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until RINSING appears on the display.
  3. Press Tick_Select Button for Oven.PNG to start rinsing.

 

Menu Settings.PNG

 

  1. After a few seconds, hot water is delivered first from the coffee spouts, then from the steam wand (if inserted). RINSING UNDERWAY, HOT WATER FROM SPOUTS appears on the display, along with a progress bar which fills gradually to indicate the stage of completion.
  2. The rinsing cycle will finish automatically. If you would like to cancel this function press CANCEL.
  • If the appliance is not used for more than four days, when switched on again, we recommend performing three rinses before use.
  • After cleaning, it is normal for the grounds container to contain water.

 

Drinks Settings

This allows you to view the current drinks settings for each profile. By using this function, you can reset drinks settings to the default value. To customise the drinks settings to your personal preference, see the ‘customising drinks’ section.

  1. Check that the profile you want to change the drinks settings for is active. The current active profile is displayed on the home screen. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until DRINKS SETTINGS appears on the display. To change the drink press NEXT.
  3. Press Tick_Select Button for Oven.PNG. The values for the first drink appear on the display. 
  4. The settings for each drink are displayed on vertical bars. The default value is indicated by a circle symbol at the side of the bar, while the current value is highlighted by the solid part of the vertical bar.
  5. To go back to the settings menu, press BACK. To scroll and display more drinks, press NEXT.
  6. To reset the default values for the drink displayed, press Reset.PNG.
  7. Press Tick_Select Button for Oven.PNG to confirm. Press BACK to go back.
  8. DEFAULT VALUES SET will appear on the display. Press Tick_Select Button for Oven.PNG. The drink has been reset to the default value.
  • To change the drink settings in another profile, go back to the home screen, select the required profile and repeat the steps.
  • To reset all the drinks in a profile to the default values, see the ‘Default Values’ section.

 

Set Time

To adjust the time on the display:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until SET TIME appears on the display.
  3. Press Tick_Select Button for Oven.PNG. The time setting panel will appear on the display.
  4. Set the current time by pressing Left Arrow_Black.PNG or Right Arrow_Black.PNG.
  5. To confirm, press Tick_Select Button for Oven.PNG (to cancel, press BACK), then press BACK to go back to the home screen.

 

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (eg in the morning) so that the appliance is ready to make coffee immediately.

To enable this function, the time must already be set correctly.

To enable auto-start:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until AUTO START appears on the display.
  3. Select the function by pressing AUTO START. The time setting panel appears on the screen.
  4. Press Right Arrow_Black.PNG or Right Arrow_Black.PNG to set the time of day you require the coffee maker to automatically turn on.
  5. Press OFF.PNG or ON.PNG to disable or enable auto start.
  6. To confirm, press Tick_Select Button for Oven.PNG or to cancel and return to the settings menu press BACK. Press BACK again to return to the home screen.
If the auto-start function is enabled, and the mains switched is turned off, this function will be reset.

 

Auto off (standby)

The auto-off function can be enabled so that the appliance turns off after a set amount of time.

To programme Auto off:

  • Press Water Hardness.PNG.
  • Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until AUTO OFF appears on the display.
  • Press AUTO OFF until the required timeframe is displayed.
  • Press BACK to go back to the home screen. The function is enabled and the appliance will turn-off after the timeframe that has been selected.

 

Energy Saving

Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption.

To disable or enable ‘Energy Saving’:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until ENERGY SAVING appears on the display.
  3. Press OFF.PNG or ON.PNG to disable or enable energy saving.
  4. Press BACK.

If enabled, the corresponding symbol appears on the display alongside the time to indicate that the function has been enabled.

 

Coffee Temperature

To modify the temperature of the water used to make the coffee:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until SET COFFEE TEMPERATURE appears on the display along with the current selected temperature of: low, medium, high or maximum.
  3.  Press SET COFFEE TEMPERATURE until the required temperature is displayed.

A different temperature can be set for each profile (see section ‘Memorising your personal profile’).

Selecting the Language

To change the language of the display:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until SET LANGUAGE appears on the display.
  3. Press SET LANGUAGE. Press Left Arrow_Black.PNGor Right Arrow_Black.PNG to display the flag corresponding to the required language. Confirm your selection by pressing the required flag.
  4.  Press BACK to go back to the home screen.

 

Beep

This enables or disables the beep emitted by the machine each time an icon is pressed or an accessory is inserted/removed.

To disable or enable beeping:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until BEEP SOUND appears on the display.
  3. Press OFF.PNG or ON.PNG to disable or enable the beeping.
  4. Press BACK.

 

Cup Light

This function enables or disables the cup lights. The lights come on each time coffee drinks or hot milk is delivered and during each rinse cycle. The lights turn off after a few seconds.

To disable or enable this function, proceed as follows:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until LIGHTS appears on the display.
  3. Press OFF.PNG or ON.PNG to disable or enable the lights.

The interior lighting comes on when the appliance is turned on.

​​​​

Emptying the Circuit

We recommend emptying the water circuit if the appliance is to be left idle for a long period of time, or before taking it to customer support for a service or repair:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until WATER CIRCUIT EMPTYING appears on the display.
  3. Press Tick_Select Button for Oven.PNG.
  4. EMPTY GROUNDS CONTAINER AND DRIP TRAY: extract and empty the grounds container and drip tray. Press NEXT.
  5. INSERT GROUNDS CONTAINER AND DRIP TRAY: insert the drip tray complete with grounds container.
  6. PLACE 2L CONTAINER UNDER SPOUTS, PRESS OK TO START: position a container under the coffee spouts and hot water spout. Press Tick_Select Button for Oven.PNG.
  7. RINSING UNDERWAY, PLEASE WAIT: the appliance performs a rinse cycle from the coffee spouts. Do not leave the appliance unattended while hot water is being delivered.
  8. EMPTY WATER TANK: extract the tank and empty it completely, then press.
  9. (If the filter is installed) REMOVE WATER SOFTENER FILTER: remove the filter from the tank. Press NEXT.
  10. INSERT WATER TANK, PRESS OK TO CONTINUE: insert the water tank and press Tick_Select Button for Oven.PNG.
  11. WATER CIRC. EMPTYING UNDERWAY: wait for the appliance to empty the circuit. As the water circuit empties, the appliance could become noisy. This is part of normal operation. Do not leave the appliance unattended while hot water is being delivered.
  12. EMPTY DRIP TRAY: remove, empty and reposition the drip tray, then press NEXT.
  13. EMPTYING COMPLETE: press Tick_Select Button for Oven.PNG.
When turned on again, the appliance asks for the circuit to be filled.
  1. WATER CIRCUIT EMPTY PRESS OK TO START FILLING PROCESS. Place a container under the spouts.
  2. Press Tick_Select Button for Oven.PNG the appliance will deliver water from the spout and then turn off.

 

Default Values

This resets all menu settings and programmed quantities back to the default settings (with the exception of the language which remains as set).

To reset the default values:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until DEFAULT VALUES appears on the display. Press Tick_Select Button for Oven.PNG.
  3. Press RESET ALL to reset all of the user profiles or alternatively select an individual profile.
  4. RESET DEFAULT VALUES: press Tick_Select Button for Oven.PNGto confirm or BACK to cancel.
  5. DEFAULT VALUES RESET: Press Tick_Select Button for Oven.PNG or BACK to go back to the home screen.

 

Statistics

This function displays statistics relating to the appliance, including:

  • The number of drinks that have been prepared.
  • Amount of water that has been delivered.
  • Total descales performed.
  • Container cleans performed.
  • Number of water filters used.

To display the statistics, relating to the appliance:

  1. Press Water Hardness.PNG.
  2. Press Left Arrow_Black.PNG or Right Arrow_Black.PNG until STATISTICS appears on the display.
  3. Press Tick_Select Button for Oven.PNG to view all the available statistics by pressing Left Arrow_Black.PNG or Right Arrow_Black.PNG.
  4. Press BACK to go back to the main screen.

 

 

 

  • Was this article helpful?