Skip to main content
Fisher & Paykel Product Help

Cavity Preparation

Preparing the product and cabinetry

The top panel may be removed to suit underbench cavity height. See the illustrations below.

Screen Shot 2017-09-27 at 2.39.02 PM.png


Screen Shot 2017-09-27 at 2.39.24 PM.png

To prevent possible steam damage to the cabinetry, ensure that any bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof polyurethane.

Screen Shot 2017-09-27 at 2.40.39 PM.png

The power outlet must be located in a cabinet adjacent to the dishwasher cavity. 

Leveling and positioning the dishwasher

  • Before sliding the dishwasher into position, adjust the feet with a spanner (4) to ensure that the dishwasher is level and the required height (5). Take care when pushing the product into the cavity that you do not bend the feet.
  • Do not lift the dishwasher from the door handle or top panel.
  • As you push product in, pull through hoses and cord, ensuring they don’t get kinked or twisted (6).
  • We recommend that you adjust the feet so that the dishwasher sits securely under the bench top so that it doesn’t tip.
  • Was this article helpful?