Skip to main content
Fisher & Paykel Product Help

Plumbing & Drainage Options

 

 

Drainage Option 1

Dishwasher and Ø 38 mm Standpipe

Drainage Option 2

Dishwasher using Drain Hose Joiner onto Sink Trap/Waste tee

  • Screw Drain hose support to back wall at correct height.
  • If space is limited for fixing, push hose through drain hose support
  • to required height.

591151C_DS DRain Opt 1.PNG

 

Ensure that drain hose is installed as close to the  underside of the benchtop as possible. This will ensure no waste re-enters the drain hose in the event of poor flow or a blockage in the plumbing.

Ensure the drain hose does not extend into water retained in the trap; an
air gap is required to prevent waste water from siphoning back into the tub.

Ensure that drain connection complys with local plumbing regulations.
  • Screw Drain hose support to back wall at correct height.
  • If space is limited for fixing, push hose through drain hose support to required  height.
  • Supplied drain hose joiner to suit 19 mm waste tee.
  • Ensure drain hose is routed straight to joiner. Remove excess drain hose material if necessary.  Do not shorten the inlet hose.

Drainage Options - Single (2).JPG

Do not connect the drain hoses to a Waste Disposal Unit, as this type of connection may lead to a blockage in the drain hoses.

 

 

  • Was this article helpful?