Skip to main content
Fisher & Paykel Product Help

Fit the Supplied Toekick Panel - DD60DC Models Only

 

Where the toekick meets the bottom of the tub is the cut-off point.

dd60dc fit the toekick (1).JPG

Mark this point on the toekick with a pencil.

 

 

dd60dc fit the toekick (2).JPG

Lay the toekick face down on
a chopping board or similiar.

dd60dc fit the toekick (4).JPG

Turn the toekick over and
score along the same line

dd60dc fit the toekick (6).JPG

Smooth the edges with a file.
Be careful of sharp edges.

dd60dc fit the toekick (8).JPG

Slide the toekick onto
the mounting rails
either side and screw
the toekick onto the
bottom of tub on
either side.

dd60dc fit the toekick (3).JPG

Score along the marked
cutoff line with a knife.

dd60dc fit the toekick (5).JPG

Gently snap off the excess

dd60dc fit the toekick (7).JPG

Snap off the two end tabs

Do not over tighten screw.
  • Was this article helpful?