Draining While Filling
Possible Cause | What to Do |
---|---|
Siphoning |
When the end of the drain hose is lower than the water level inside your washer, water drains or ‘siphons’ as your washer fills. Check the drain hose is inserted into the standpipe correctly. The standpipe should be minimum 600-1000mm in height. Refer to your Installation Guide. |
Drain hose too Low | Ensure the height of the drain hose is at least 600mm from the floor level. Refer to 'Draining' in your Installation Guide. |
Drain hose sitting in Water |
If the end of the drain hose is sitting in water, check the drain is not blocked (clear the drain). Check the drain hose is correctly installed on the standpipe. Refer to your Installation Guide. |
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
or Contact Us