Skip to main content
Fisher & Paykel Product Help

Customising wash cycles

To customise a cycle

You can program your washer to remember the wash options you prefer for each wash cycle. For instance, you may want to set the ‘Regular’ cycle to default to a ‘Warm’ wash or set ‘Heavy’ cycle to include a ‘Soak’.

WashSmart™ Eco washer, WashSmart™ washer and QuickSmart™ washer

  1. Touch ‘POWER’ Screen Shot 2017-06-30 at 9.35.51 AM.png.
  2. Touch and hold the wash cycle button you wish to customise eg ‘Regular’, for 3 seconds.
  3. You will hear 2 beeps and the screen will display Screen Shot 2017-06-30 at 9.40.37 AM.png.
  4. Select your preferred settings eg ‘Low’, ‘Cold’, ‘700’, ‘Eco-Rinse’.
  5. Touch the cycle button to store your settings. You will hear a long beep to confirm the changes have been saved.
  6. Power off your washer.

To change your customised wash cycle simply repeat these steps.

Screen Shot 2017-06-30 at 9.41.26 AM.png
WashSmart Eco washer and WashSmart washer
(WashSmartTM Eco washer panel is shown) Customising a wash cycle, eg ‘Regular’ cycle

Screen Shot 2017-06-30 at 9.41.49 AM.png
QuickSmart washer
Customising a wash cycle, eg ‘Regular’ cycle

  • Was this article helpful?