Choosing the right cycle
If you wish to use fabric softener you will need to select ‘Softener’ by touching the ‘Options’ button which will give you a deep rinse. If the ‘Softener’ option is not selected, the fabric softener will not be dispensed correctly.
A small volume of water remaining in the dispenser at the end of the cycle is normal.
Adding the fabric softener
Always follow the manufacturer’s recommendations on the fabric softener packaging for the correct dosage. Measure the softener out into the cap and pour into the fabric softener dispenser. The softener will remain in the dispenser until the deep rinse where water flushes it into the bowl.
Adding softener into the fabric softener dispenser
Cleaning the dispenser
The dispenser may need cleaning periodically. Please refer to ‘Caring for your washer’ section for advice about cleaning the dispenser.
Scrud is the name of the waxy build-up that can occur within any washer when fabric softener comes into contact with detergent. This build-up is not brought about by a fault in the washer. If scrud is allowed to build up in the washer it can result in stains on clothes and/or an unpleasant smell in your washer. Scrud can be kept under control by using the ‘Bowl Clean’ cycle regularly (refer to ‘Caring for your washer’ section).
If you wish to use fabric softener we recommend:
- Using it sparingly. Measure it carefully to ensure you do not fill above the ‘Max’ level of the dispenser.
- Using a fabric softener that is of a thinner consistency.
- Clean the dispenser as soon as the cycle has finished.
- Clean your washer regularly using the ‘Bowl Clean’ cycle (refer to ‘Caring for your washer’ section).
- Cold water washing increases the chance of this build-up occurring. We recommend a warm or hot wash at regular intervals, eg every 5th wash.