Skip to main content
Fisher & Paykel Product Help

Setting the clock

  1. Last updated
  2. Save as PDF
Introduces and details how to set the clock for a built-on oven.
Important-Icon.png Before using your oven for the first time and after a power cut, the clock must be set. The oven will not function if the clock is not set.

 

 

Screen Shot 2017-06-26 at 12.19.57 PM.png

  1. When the power to the oven is turned on or restored after a power failure, Screen Shot 2017-06-26 at 12.21.50 PM.png will flash in the display


Screen Shot 2017-06-26 at 12.22.47 PM.png

  1. Touch the Screen Shot 2017-06-26 at 10.01.37 AM.png or Screen Shot 2017-06-26 at 9.59.46 AM.png to set the time.

Screen Shot 2017-06-26 at 12.24.40 PM.png

  1. Touch the cooking time Screen Shot 2017-06-26 at 12.25.32 PM.png and stop time Screen Shot 2017-06-26 at 12.25.53 PM.png controls together for 2 seconds to accept the time
  • the display will stop flashing
  • the oven will beep to confirm the time is set

Screen Shot 2017-06-26 at 12.28.18 PM.png

To Change the Time

  1. Touch the cooking time Screen Shot 2017-06-26 at 12.25.32 PM.png and stop time Screen Shot 2017-06-26 at 12.25.53 PM.png controls together for 2 seconds.
    The centre dot will flash.
    Touch the Screen Shot 2017-06-26 at 10.01.37 AM.png and Screen Shot 2017-06-26 at 9.59.46 AM.png control's to set the new time
    Touch the cooking time Screen Shot 2017-06-26 at 12.25.32 PM.png and stop time Screen Shot 2017-06-26 at 12.25.53 PM.png controls together again for 2 seconds to accept the new time.
  • the centre dote will stop flashing
  • the oven will beep to confirm the new time is set.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
    Manual
    User Guide
  2. Tags
    This page has no tags.