Skip to main content
Fisher & Paykel Product Help

Using the electronic timer

You can use the timer at any time, even when the oven is not in use.

Important-Icon.png

The timer does NOT turn the oven off.

Screen Shot 2017-06-22 at 1.32.56 PM.png

Fig. 18 Six-button clock display and control buttons

To set the timer 

  1. Press Screen Shot 2017-06-22 at 10.23.06 AM.png. Screen Shot 2017-06-22 at 10.18.51 AM.png will show and the symbol will start flashing.

  2. Press Screen Shot 2017-06-22 at 10.06.24 AM.png and Screen Shot 2017-06-22 at 10.06.29 AM.png to set the time you want (up to 23 hours and 59 minutes, in 1-minute steps).

  • After a few seconds, the clock will show the time of day with the Screen Shot 2017-06-22 at 10.34.43 AM.png symbol steadily lit. The timer is now counting down.

To check the remaining time

Press Screen Shot 2017-06-22 at 10.23.06 AM.png.

To cancel the timer

  1. Press Screen Shot 2017-06-22 at 10.23.06 AM.png.

  2. Press Screen Shot 2017-06-22 at 10.06.24 AM.png until the time is reset to Screen Shot 2017-06-22 at 10.18.51 AM.png
  • After a few seconds, the clock will show the time of day.

When the set time is up

  • The timer will beep and the Screen Shot 2017-06-22 at 10.34.43 AM.png symbol will flash. Press Screen Shot 2017-06-22 at 10.23.06 AM.png to stop the beeping and turn the timer off.
  • After a few seconds, the clock will show the time of day.

To adjust the beep volume

Press Screen Shot 2017-06-22 at 10.06.24 AM.png to hear the next volume level. The last one selected will be stored.

  • Was this article helpful?