Skip to main content
Fisher & Paykel Product Help

Setting the clock

Introduces how to set and make changes to the clock.
To set the clock

When the power to the appliance is turned on or restored after a power failure will flash in the display.

  1. Press   and  together - the display will stop flashing. The clock is now set for
  2. Press  and  together again to change the time. The display will flash

  3. Press  and  to set the time. After a few minutes the display will be steadily lit, showing the time is set.

To change the time
  1. Press  and  together. The display will flash.

  2. Press  and  to set the time.

After a few seconds the display will remain steadily lit, showing the time is set.

  • Was this article helpful?