Skip to main content
Fisher & Paykel Product Help

CK models - Setting Delay start

This feature can delay the start of a wash programme by 1 to 12 hours.

  1. Load the dishes, add detergent and close the door.

  2. Press  to turn the dishwasher on.

  3. Check that the display shows the wash programme you require. If not, see instructions for ‘Changing the wash programme’.

  1. Press  Delay. The symbol will light up. The display will show the delay time (hours).


  1. Press Delay again to select the number of hours you wish to delay the wash by(1hr - 12hr in hour steps).

Press and hold Delay to scroll more quickly to your desired delay time.

 

  1. Press  to start the countdown. The display will countdown in hours. The wash programme will automatically start when the delay time is over.

To set Delay start with Auto

  1. Load the dishwasher and press  to turn it on.

  2. Set the Delay (follow steps 4 & 5 above).

  3. Press Auto.
    -The dishwasher will automatically start the Auto cycle when the delay time is over.

    To cancel Delay start, press  to cancel the delay and the selected programme.

    Press  again to turn the dishwasher off or select a new programme.

  • Was this article helpful?