Skip to main content
Fisher & Paykel Product Help

Using your induction cooktop

  1. Last updated
  2. Save as PDF

Screen Shot 2017-06-20 at 9.58.13 AM.png

CI302DTB model

Screen Shot 2017-06-20 at 9.58.29 AM.png

CI603DTB model

Screen Shot 2017-06-20 at 9.58.47 AM.png

CI604DTB model

Screen Shot 2017-06-20 at 9.59.06 AM.png

CI754DTB model

Screen Shot 2017-06-20 at 9.59.17 AM.png

CI905DTB2 model

2017-07-24_1024.png

CI905DTB3 model

Cooking Zone

Zone Diameter

Power

Powerboost

Recommended Minimum Pan Size
Screen Shot 2017-06-20 at 10.07.21 AM.png

145 mm

1400 W

2200 W *

120 mm
Screen Shot 2017-06-20 at 10.07.29 AM.png

180 mm

1850 W

3000 W *

145 mm
Screen Shot 2017-06-20 at 10.07.35 AM.png

210 mm

2300 W

3700 W *

145 mm
Screen Shot 2017-06-20 at 10.07.42 AM.png

180/260 mm

1850/2600 W

3000/5500 W *

125 mm (inner zone)
250mm (dual zone)
Screen Shot 2017-06-20 at 10.07.48 AM.png

SmartZone

2100 W

3700 W **

120mm (un-bridged)
250mm (bridged)
Note-Icon.png

* Maximum output when set on PowerBoost.
** PowerBoost is not available when cooking zones are bridged. See ‘Using your cooktop’s special features.

Control panel

Screen Shot 2017-06-20 at 10.16.43 AM.png

To select a setting on the selector:

Screen Shot 2017-06-20 at 10.21.20 AM.png   Screen Shot 2017-06-20 at 10.21.30 AM.png

Touch at one point to “jump” to a specific setting

OR

slide your finger along the selector.

 

To start cooking

Screen Shot 2017-06-20 at 10.07.21 AM.png Touch and hold the ON/OFF control for 2 seconds.
A white indicator light will glow.		 Screen Shot 2017-06-20 at 10.26.34 AM.png
Screen Shot 2017-06-20 at 10.07.29 AM.png Screen Shot 2017-06-20 at 10.33.17 AM.png will appear in the cooking zone displays.

Screen Shot 2017-06-20 at 10.26.47 AM.png

Screen Shot 2017-06-20 at 10.07.35 AM.png Place a suitable pan on the cooking zone you wish to use.

  • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
Important-Icon.png

Always place small pans in the centre of the cooking zone.
Screen Shot 2017-06-20 at 10.26.55 AM.png

Screen Shot 2017-06-20 at 10.07.42 AM.png Select a heat setting by touching or sliding the setting selector with your finger.

  • If you don’t choose a heat setting within 20 seconds, the cooktop will automatically turn off. Start with step 1 again.
  • You can modify the heat setting at any time during cooking.

Screen Shot 2017-06-20 at 10.27.00 AM.png

If a display flashes Screen Shot 2017-06-20 at 10.37.54 AM.png alternately with the heat setting

This means that:

  • you have not placed a pan on the correct cooking zone or
  • the pan you’re using is not suitable for induction cooking or
  • the pan is too small or not properly centred on thecooking zone.

Screen Shot 2017-06-20 at 10.39.02 AM.png

No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.

Dual zone cooking (CI905DTB & CI603DTB models only)

When using a small pot on the dual cooking zone, be sure to centre it so that the inner zone will detect the pan. If the pan covers the outer zone, then the outer zone will automatically switch on.

SmartZones (CI905DTB3, CI604DTB & CI302DBT models only)

The SmartZones are large. You may place several small pots on the SmartZone and they will be detected as if they were one large pot.

Important-Icon.png

The whole of the SmartZone is activated when a pot is detected. This means that other magnetisable items (such as cutlery) sitting in the cooking zone will heat up. Never leave cutlery or other magnestisable items on your cooktop.

 Screen Shot 2017-06-20 at 10.40.09 AM.png

When you have finished cooking

Screen Shot 2017-06-20 at 10.41.32 AM.png

Screen Shot 2017-06-20 at 10.41.44 AM.png
Screen Shot 2017-06-20 at 10.07.21 AM.png Turn the cooking zone off by touching or sliding down to Screen Shot 2017-06-20 at 10.33.17 AM.png.
Make sure the display shows Screen Shot 2017-06-20 at 10.33.17 AM.png.		 Screen Shot 2017-06-20 at 10.07.21 AM.png Turn the whole cooktop off by touching the ON/OFF control.

Screen Shot 2017-06-20 at 10.41.53 AM.png

Screen Shot 2017-06-20 at 10.07.29 AM.png Beware of hot surfaces
Screen Shot 2017-06-20 at 10.45.11 AM.png will flash in the window of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled down to a safe temperature.

Locking the controls

  • You can lock the controls to prevent unintended use (for example children accidentally turning cooking zones on).
  • When the controls are locked, all controls except the ON/OFF control are disabled.
 2017-07-24_1052.png

To lock the controls

  1. Make sure that the cooktop is turned on but no cooking zone is in use.
  2. Touch and hold the keylock control Screen Shot 2017-06-20 at 10.48.54 AM.png for 5 seconds. The white indicator light above the control comes on, indicating that the controls are locked.
Note-Icon.png

The cooktop will automatically turn off after 20 seconds, but the controls will still be locked when you turn the cooktop on again.

If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator light will flash and the cooktop will remain locked.

To unlock the controls

  1. Make sure the cooktop is turned on.
  2. Touch and hold the keylock control Screen Shot 2017-06-20 at 10.48.54 AM.png for 3 seconds. The white indicator light above the control goes out.
  3. You can now start using your cooktop.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Topic
    Manual
    User Guide
  2. Tags
    This page has no tags.